Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
Provides temporary battery power when the utility power is out.
Ensures clean, uninterrupted power to protected equipment when generator power is used.
Input power factor correction
Minimizes installation costs by enabling the use of smaller generators and cabling.
Protects connected loads from surges, spikes, lightning, and other power disturbances.
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Frequency and voltage regulation
Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
Resettable circuit breaker
Easy recovery from overloads; no need to replace a fuse.
Low operating and maintenance costs with proven reliability and intelligent battery management.
Intelligent battery management, pioneered by APC, maximizes battery performance and life through intelligent, precision temperature compensated charging. Automatic self tests insure battery reliability and warn customers in advance of battery replacement. Convenient, easy to connect, hot-swappable battery modules provide battery replacement without powering down.
Avoids costly power problems by keeping your IT equipment and data protected and available.
Network grade power conditioning protects from damaging surges and disruptive noise. The double conversion architecture provides tight voltage regulation, frequency regulation ,and zero transfer time to battery during power events.
Peace of mind that comes with full equipment compatibility and reliability of a leader
Provides pure sine wave output which is recommended by server manufacturers using active power factor corrected (PFC) power supplies. Safety agency tested and approved means that you can deploy Smart-UPS with confidence that they meet or exceed the industrys most rigorous standards.
Save time with easy and convenient remote accessibility.
Network manageable via serial, USB or optional Ethernet. Includes Powerchute Network Shutdown Software for convenient monitoring and control, safe operating system shutdown, and innovative energy management capabilities.
Protects the initial investment in the UPS when migrating from tower to rack-mount environment.
Flash upgradeable firmware
Install maintenance releases of firmware remotely using FTP.
Plug-and-Play external batteries
Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS.
Automatic internal bypass
Supplies utility power to the connected loads in the event of a UPS power overload or fault.
Temperature-compensated battery charging
Prolongs battery life by regulating the charge voltage according to battery temperature.
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
Automatic restart of loads after UPS shutdown
Automatically starts up the connected equipment upon the return of utility power.
Allows additional run time to be quickly added as needed.
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
LED status indicators
Quickly understand unit and power status with visual indicators.
Customize UPS capabilities with management cards.
Provides management of the UPS via a serial port.
InfraStruXure Manager Compatible
Enables centralized management via the APC InfraStruXure Manager.
Provides remote power management of the UPS over the network.
Output power capacity
4.5 KWatts /5.0 kVA
Max Configurable Power (Watts)
4.5 KWatts /5.0 kVA
Nominal Output Voltage
Output Voltage Distortion
Less than 2%
Output Frequency (sync to mains)
50/60Hz +/- 3 Hz
Other Output Voltages
Load Crest Factor
3 : 1
Double Conversion Online
(6) IEC 320 C13 (Battery Backup)
(2) IEC Jumpers (Battery Backup)
(4) IEC 320 C19 (Battery Backup)
Internal Bypass (Automatic and Manual)
Nominal Input Voltage
40 - 70 Hz (auto sensing)
Hard Wire 3 wire (1PH+N+G)
Input voltage range for main operations
160 - 275V
Input voltage adjustable range for mains operation
100 - 275 (half load)V
Other Input Voltages
Batteries & Runtime
Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
Included Battery Modules
Typical recharge time
Expected Battery Life (years)
3 - 5
Extendable Run Time
Extended Run Options
View Runtime Graph
View Runtime Chart
View Efficiency Graph
Communications & Management
RJ-45 10/100 Base-T ,RJ-45 Serial ,Smart-Slot ,USB
Multi-function LCD status and control console
Audible and visible alarms prioritized by severity
Emergency Power Off (EPO)
Available SmartSlot Interface Quantity
Surge Protection and Filtering
Surge energy rating
Units per Pallet
0 - 40 C
Operating Relative Humidity
0 - 95% non-condensing %
-15 - 45 C
Storage Relative Humidity
0 - 95% non-condensing %
Audible noise at 1 meter from surface of unit
Online thermal dissipation
CE, CE Mark, EAC, EN/IEC 62040-1, EN/IEC 62040-2, ENERGY STAR V1.0 (EU), IRAM, RCM, VDE
3 years repair or replace (excluding battery) and 2 years for battery
Sustainable Offer Status
REACH: Contains No SVHCs
Your review appreciation cannot be sent
Are you sure that you want to report this comment?
Your report has been submitted and will be considered by a moderator.
Your report cannot be sent
Write your review
Your comment has been submitted and will be available once approved by a moderator.